The CT RAD™ Micro Pro (Rapid Aiming Dot) Electronic Sight is an ultra-compact Open Reflex Sight for compact and subcompact pistols. Featuring a red 3 MOA aiming dot, the CT RAD™ Micro Pro has a recessed and fully multi-coated lens with a large quick acquisition window. The CT RAD™ Micro Pro comes with the CT RADIANT™ Ambient Light Sensor that automatically adjusts the aiming dot’s brightness to the surrounding lighting condition. The CT MOTION™ Sensor detects movement of the firearm and automatically turns the reflex sight on. The sight powers off after 2 minutes of zero movement.
The Micro is easily installed on an optics cut slide using the CT micro™ footprint that is also compatible with the Shield RMS® and JPoint® footprints. The Micro has a rear sight notch cut into the back to line up with your front iron sight. Made of 7075 Series Aerospace Aluminum, it is 30% stronger than most industry standard sights made with 6061 Series Aluminum. The entire CT RAD™ family has an Innovative top strap design that deflects force if the sight is dropped. Their engineers developed a better way to reduce stress on the lens of reflex sights. By combining out-of-the-box thinking with next-level physics, they designed a system that both re-enforces your optic and reduces stress if it happens to get dropped.
I purchased a Kimber R7 along with the Crimson Trace RAD Pro 3 MOA sight. I mounted it and started to site it in. After the second shot, the laser was gone. Found that battery would die very fast. Called Crimson who sent me a new sight immediately. Installed it and it has been working fine. Thank Crimson for jumping onto this in a hurry. Completely satisfied. P.S. I do have to sneak up on the pistol laying there and check to see that the laser is off. Then I move the gun and the laser comes on instantly.