Daniel Defense DDM4V7 LW 5.56 NATO Semi-Auto Rifle with Vortex Venom 1-6x24 SFP Riflescope and 30mm Cantilever Mount

The DDM4 V7 AR15 style firearm features M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16 inch barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.

Firearm Features

• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
• CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
• RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
• BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
• PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
• Made in the USA!

About the Scope

When you’re ready to maximize the capabilities of your carbine, the Venom® 1-6x24 SFP delivers the downrange accuracy, workhorse function, and speed you need for opening the throttle on close- to mid-range engagements. Water, fog, and shockproof. Great glass quality. The illuminated AR-BDC3 reticle makes for quick target acquisition. Standard throw-lever delivers on-the-fly magnification. For entry-level carbine users, it’s a hardworking LPVO built to get you in the game.

Whats in the box?

• Flip Caps
• Throw Lever
• Lens Cloth
• CR2032 Battery
• 2mm Custom Tool
• 2" Sunshade

Scope Features

• SECOND FOCAL PLANE: Ensures an easy-to-see reticle image throughout entire magnification range.
• ILLUMINATED AR-BDC3 RETICLE: Delivers fast and accurate close- to mid-range target engagements.
• THROW LEVER: The included throw lever can be installed for quick and easy magnification adjustments.
• XD™ OPTICAL SYSTEM
• FOGPROOF
• FULLY MULTI-COATED LENSES
• SHOCKPROOF
• ARMORTEK®
• NITROGEN GAS PURGED
• WATERPROOF

• Magnification: 1-6x
• Objective Lens Diameter: 24
• Focal Plane: SFP
• Reticle: AR-BDC
• Illumination: Yes
• Eye Relief: 3.7"
• Linear Field of View at 100 yards: 126' - 20.2'
• Max Travel Elevation: 140 MOA
• Max Travel Windage: 140 MOA

About the Mount

Use this cantilever mount for mounting 30 mm telescopic sights onto flattop style AR-15 rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum construction.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.